Consolidating concrete

03-Dec-2017 04:43

Add balance of required water slowly while mixer is running, not exceeding maximum recommended volume of water.

Maximum recommended volume of water is 3.15 L (0.83 US gallon) per 30 KG (66 lb) bag.

Remove all delaminated or unsound concrete providing a roughened surface and a minimum of 25 mm (1 inch) clearance behind any corroded reinforcing steel.

The perimeter of the repair area should be saw-cut a minimum of 20 mm (¾ inch).

Repair any leaks in the formwork, as the formwork should be watertight. For soffit repairs, vent holes should be included for air venting.

Formwork should contain drainage outlets for pre-wetting substrate.Repair any leaks in the formwork, as the formwork should be watertight. Gravity feed or pump MS-S10 SCC into forms and allow mix to fully encapsulate any existing rebar. Forms should not be removed until mix has attained 75% of its 28 day strength.Refer to ACI 347, “Guide to Formwork for Concrete”.Prices, promotions, styles, and availability may vary. Prices and availability of products and services are subject to change without notice.

Mar 23, 2016. TRB's National Cooperative Highway Research Program NCHRP Report 628 Self-Consolidating Concrete for Precast, Prestressed Concrete Bridge Elements explores recommended guidelines for the use of self-consolidating concrete SCC in precast, prestressed concrete bridge elements. The report.… continue reading »

Read more

Results. “Implementation of Self-Consolidating Concrete for prestressed applications—Phase II Bridge construction and in-place performance,” ALDOT Project 930-799, conducted by the Auburn. University Highway Research Center. Funding for the project was provided by the Alabama. Department of Transportation.… continue reading »

Read more

An Introduction to Self-Consolidating. Concrete SCC. TECH BULLETIN. What is SCC? Self-Consolidating Concrete has properties that differ considerably from conventional slump concrete. SCC is highly workable concrete that can flow through densely reinforced and complex structural elements under its own weight and.… continue reading »

Read more

Sakrete® Self-Consolidating Concrete Mix is a dry, preblended, one-component, selfconsolidating, cementitious, polymer-modified concrete mix containing coarse aggregate, silica fume, and an integral migrating corrosion inhibitor. Designed for application thickness minimum of 1 in. and maximum thickness of 8 in.… continue reading »

Read more